SPA-H steel section steel sheet low temperature

Our quality control department will do inspection for details of the steel materials SPA-H steel section before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

EN 10083/3-2006 42crmo4 is an industrial material. 42CrMo4 is used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and spring clips that are heavily loaded. 42CrMo4 is also It can be used for oil deep well drill pipe joints and fishing tools under 2000m.

SPA-H steel section, 27SiMn material has high strength and wear resistance, high hardenability, medium plasticity during cold deformation, good machinability and fair weldability. It is mostly used after quenching and tempering, and can also be used in normalizing or hot rolling state. 27SiMn material chemical elements: C: 0.24-0.32, Si: 1.10-1.40, Mn: 1.10-1.40. 27SiMn material mechanical properties: tensile strength 980 MPa; yield strength: 835 MPa; elongation after fracture: 12%; impact energy: 39J. 27SiMn material can be used to make hot stamping parts with high toughness and high wear resistance, which do not need heat treatment or normalizing, such as tractor track pins.

Normalizing is to heat the steel parts to 30~80℃above the critical temperature for a period of time. Then the parts are taken out of the furnace and cooled in air. Since the cooling rate of normalizing is faster than that of annealing, the strength and hardness of normalized SPA-H steel section are higher than that of annealed SPA-H steel section, but the elimination of internal stress is not as good as annealing. The normalizing operation of SPA-H steel section is simple, the cost is low, the productivity is high, and it is widely used in actual production.

Both parties shall confirm the SPA-H steel section material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the SPA-H steel section steel plant.

We specialize in the production and sale of steel products. We have many customers from all over the world. Our products SPA-H steel section have strict quality inspection departments, so we have absolute quality and technical advantages. Good promotion system, with advanced business philosophy, create development space, enhance the value of employees, improve the quality of life as the mission. Pursuing green procurement, energy conservation and consumption reduction.