Q355GNH Z35 plate hot-rolled technique

The company has the industry's advanced automated production lines and precision laboratory instruments and a capable steel industry management team. Through scientific management, optimized technology, and rigorous testing, the company will keep the production efficiency and production quality at the leading level in the industry and continue to provide customers with high-quality Q355GNH Z35 plate products. At the same time, the company is committed to building a comprehensive steel manufacturing industry and strives to make the company leads new progress and development.

ASTM A633 standard covers four grades A, C, D, and E normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. Q355GNH Z35 plate, A633 Grade A structural steel provides a minimum yield point of 42 ksi [290 MPa] in thicknesses through 4 in. [100 mm], inclusive. Grades C and D provide a minimum yield point of 50 ksi [345 MPa] in thicknesses up to 2.50 in. [65 mm], inclusive and 46.0 ksi [315 MPa] in thicknesses over 2.50 in. to 4.0 in. [65 to 100 mm], inclusive.

20Mn2 steel has medium strength, and the properties of 20Mn2 steel and 20Cr steel are similar. The impact toughness and weldability of 20Mn2 steel at low temperature are better than those of 20Cr steel. The plasticity and machinability of 20Mn2 steel are high during cold deformation. The hardenability of 20Mn2 steel is higher than that of corresponding carbon steel, Q355GNH Z35 plate. Chemical composition of 20Mn2 steel: C: 0.17-0.24, Si: 0.17-0.37, Mn: 1.40-1.80. Mechanical properties of 20Mn2 steel: tensile strength ≥ 785 MPa, yield strength ≥ 590 MPa, elongation after fracture ≥ 10%, section expansion rate ≥ 40%, impact absorbed energy ≥ 47J.

As the thickness and hardness of Q355GNH Z35 plate increase, the tendency to crack at the cutting edge increases. In order to prevent the Q355GNH Z35 plate from cutting cracks, preheating should be carried out before Q355GNH Z35 plate cutting. Special attention should be paid to preheating to make the entire Q355GNH Z35 plate interface evenly heated to avoid local overheating in the area contacting the heat source. If the whole Q355GNH Z35 plate cannot be preheated, the partial preheating method can be used instead.

The company's after-sales service team is a high-quality professional team. Most after-sales employees have rich service experience and have reached the level of after-sales engineer. The after-sales department implements the after-sales personnel responsibility system and a 24-hour response mechanism. The company's advanced customer relationship management system provides customers with "standardized and streamlined services". A sound customer relationship maintenance system, and a "one-stop" customer satisfaction tracking system, all reflect our strong after-sales service guarantee.

Service concept: first time to understand customer needs, first time to solve customer worriesVision: to be the leading steel materials supplier in the worldWorking principles: Keep promises; Spare no efforts; Be practical and innovative; Pursue excellenceTalent concept: build a team with a dream and complete a dream with a team!Family culture: we rely on the principles of equality, trust, appreciation and family love to form a harmonious and warm family!