plate JIS G3125 SPA-H chemical composition and other common knowledge

We are world class steel plate JIS G3125 SPA-H materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for plate JIS G3125 SPA-H quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.

Chinese grade of 20# steel plate: No.20American grade: ASTM1020Japanese grade: S20CGerman, British and French grades: C22, C20CMaterial No.: 1.0402, 1.0411Density: 7.85The strength of 20# steel plate is slightly higher than that of 15# steel plate, with little quenching and no tempering brittleness. plate JIS G3125 SPA-H, 20# steel plate is generally used for bending and so on processing. The welding performance of arc welding and contact welding is good. When gas welding, the 20# steel plate with thin thickness and strict or complex shape is easy to crack.

The weldability of plate JIS G3125 SPA-H is good. It means that under certain process and construction conditions, plate JIS G3125 SPA-H can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.

For stainless steel plate cutting, the choice of cutting method is determined by the thickness of steel plate. If the thickness of plate JIS G3125 SPA-H stainless steel plate is more than 20 mm, flame cutting is adopted, while the thin plate is suitable for plasma cutting. In addition, if the cutting requirements are relatively high, laser cutting can be used. In addition, if the plate JIS G3125 SPA-H stainless steel plate is used as a billboard, plasma cutting is adopted, Because it uses thin plates.

T11 steel is a steel grade produced according to American Standard ASTM A213. T11 steel is used for boiler, superheater and heat exchanger tubes with minimum wall thickness. Chemical composition of ASTM A213 T11 steel: C 0.05-0.15, Si 0.50-1.00, Mn 0.30-0.60, P, S ≤ 0.025, Cr 1.00-1.50, Mo 0.44-0.65. Mechanical properties of ASTM A213 T11 steel: tensile strength ≥ 415 Mpa, yield strength ≥ 170 Mpa, elongation ≥ 30%. The main ASTM A213 steel pipe grades are A213 T11, A213 T12, A213 T22, plate JIS G3125 SPA-H, etc.

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.