A588 Grade B railway steel steel for sheet coil and pipe

Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.

ASTM A633 standard covers four grades A, C, D, and E normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. A588 Grade B railway steel, A633 Grade A structural steel provides a minimum yield point of 42 ksi [290 MPa] in thicknesses through 4 in. [100 mm], inclusive. Grades C and D provide a minimum yield point of 50 ksi [345 MPa] in thicknesses up to 2.50 in. [65 mm], inclusive and 46.0 ksi [315 MPa] in thicknesses over 2.50 in. to 4.0 in. [65 to 100 mm], inclusive.

A588 Grade B railway steel, P355GH steel yield strength in different thickness has different values.Thickness 8-16mm: 355MPa min., ＞16-40mm: 345MPa min., ＞40-60mm: 335MPa min., ＞60-100mm: 315MPa min., ＞100-150mm: 295MPa min., ＞150-250mm: 280MPa min. The elongation minimum is 20%. P355GH plate under EN10028-2:2003 standard is a pressure vessel steel. It is always delivered in hot rolling, controlled rolling, normalizing.

The cold bending method is mainly used to produce cold-formed section steel and welded pipe. The cold bending method is to bend the steel strip or steel plate into various cross-section shapes by the cold bending machine in the cold state. If the A588 Grade B railway steel steel pipe is bent into a circular, square or other hollow shape and welded by a proper welding method, it is a welded pipe. The advantages of cold bending: first, the cold-formed section steel is light in weight and large in bearing capacity, and it can save metal by replacing the hot-rolled section steel; second, it can produce all kinds of A588 Grade B railway steel extremely thin, extremely wide and complex section steel which can not be produced by hot rolling.

We have a professional after-sales department to collect all information related to customers, so as to make relevant treatment in time according to the information, and file it; guide the user's product use methods and precautions; coordinate with the sales department, visit customers regularly, understand the customer's use and new requirements, and make a customer visit record; When communicating with customers, they should be enthusiastic and careful to understand the situation of product problems and put forward solutions

The company always adheres to the concept of green production, follows the development path of innovation, transformation and improvement, and has carried out in-depth cooperation with Zhengzhou University and other scientific research institutes, planning from a high starting point, strict standard design, and successfully implementing engineering projects With nearly 20 research and development projects, the company's production technology and equipment are at the forefront of the industry, and indicators such as environmental protection, energy consumption, cost, and resource utilization have reached the advanced level in the industry.