Plate specification S355J2W steel H section

home > Stock

Plate specification S355J2W steel H section

Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.

Tempering includes high temperature tempering, medium temperature tempering and low temperature tempering. Tempering means to reheat the S355J2W steel H section quenched steel to a certain temperature and then cool it in a certain way. Tempering can reduce or eliminate the internal stress produced by quenching, reduce the hardness and strength, and improve the ductility or toughness of steel. After S355J2W steel H section quenching, the workpiece should be tempered in time, and the required mechanical properties can be obtained through the combination of quenching and tempering.

For Q235 steel, Q represents the yield limit of this material, and the following 235 refers to the yield value of Q235 steel, which is about 235 MPa. The S355J2W steel H section, Q235 steel yield strength decreases with the increase of the thickness of the material. The yield strength is 235 MPa when the plate thickness / diameter is ≤ 16mm; 225 MPa is the yield strength when the thickness is 16mm < plate thickness / diameter ≤ 40mm; 215 MPa is the yield strength when 40mm < plate thickness / diameter ≤ 60mm; 205 MPa is the yield strength when 60mm < plate thickness / diameter ≤ 100mm; 195 MPa when the plate thickness / diameter is ≤ 150mm; 195 MPa when the thickness / diameter is less than 150mm; and ≤ 200mm when the thickness / diameter is less than 150mm The yield strength is 185 MPa.

To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.

Ask for the instant quotation