A36 steel and S355J0W hot rolled sheets to Malaysia

A36 steel and S355J0W hot rolled sheets to Malaysia

A36 steel and S355J0W hot rolled sheets to Malaysia
  • Comments: Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection rep

Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.

Both 14Cr1MoR pressure vessel steel and 15CrMoR pressure vessel steel belong to Cr-Mo hydrogen resistant steel, and they are special steel in strict sense. S355J0W hot rolled sheets, Cr-Mo hydrogen resistant steel is suitable for petrochemical, nuclear power, steam turbine cylinder block, thermal power and other large-scale equipment with high temperature and high pressure and connected with hydrogen or hydrogen mixed medium. Moreover, 15CrMoR pressure vessel steel has high endurance strength below 550 °C.

The secondary quenching and low temperature tempering of wear resistant composite plate are mainly used for high alloy steel workpieces without mechanical processing after carburizing. Carburizing, high-temperature tempering, one-time heating quenching, low-temperature tempering, quenching temperature 840-860℃, mainly used for Cr Ni alloy carburizing workpiece. The second quenching and low-temperature tempering of wear-resistant composite plate, S355J0W hot rolled sheets mainly improves the microstructure of the infiltrated layer. When the requirements for core properties are not high, quenching can be performed between AC1 and AC3, and when the requirements for core properties are high, it should be quenched above AC3.

In 2013, one of our clients in Korea purchased 890 tons Q345B square tube from us for one building construction project. Our clients required no burr in the side of the tube, we finally produce the goods with great condition and +/-0.25mm tolerance for wall thickness, which is a very great tolerance with customers’ required size. Our square tube full available range is 2-16mm for wall thickness, and 40-500mm for width. In addition, our Q/C department will seriously control all of the process of every order.

Ask for the instant quotation