S355J2W to EN 10025-5 steel strip The company contributes to environmental protection

Vigorously develop circular economy: the company adheres to the development path of circular economy, realizes the efficient utilization of energy and resources, implements "four closed circuits" for renewable gas, industrial water, solid waste and waste heat steam according to the reduction of resource consumption - reuse - recycling, vigorously promotes advanced technologies such as energy-saving new technologies, new processes, new materials, and promotes the competition of enterprises Struggle.

S355J2W to EN 10025-5 steel strip,Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;

S355J2W to EN 10025-5 steel strip,Because , boiler steel plate is a product of important use, the safety and reliability requirements are strict, and the manufacturing technology is difficult. The boiler steel plate material must have the following main characteristics:The boiler steel plate has high yield strength performance in a certain temperature range (medium temperature and high temperature);The boiler steel plate has sufficient toughness, no brittle failure accident will occur during manufacturing or use.

X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.

Our client purchase more than 900 tons stainless steel square pipe from India. And we do the inspection for each one pipe before shipment.During the inspection, the inspector saw that the surface of the square pipe kept the original color of the stainless steel, no fracture, no depression and other quality defects was found.

S355J2W to EN 10025-5 steel strip,With the increase of carbon content in the steel material, the yield point and tensile strength increase, but the plasticity and impact decrease. When the carbon content is more than 0.23%, the welding performance of the steel material becomes worse. Therefore, the carbon content of low alloy structural steel used for welding is generally less than 0.20%. The high carbon content can also reduce the atmospheric corrosion resistance of steel material, and the high carbon steel in the open air is easy to rust; in addition, carbon can increase the cold brittleness and aging sensitivity of steel material.

Company management philosophy: integrity-based, service-oriented, excellence, affinity symbiosis. Based on quality, continuously create maximum value for customers. Always have a grateful heart, thank the society, thank family and friends for their support and help to the development of the company, thank customers for their trust, thank colleagues for their cooperation, and thank competitors for their supervision.