S235J0W low alloy steel vs SA 36 sheet

At the same time of doing well in production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

S235J0W low alloy steel,
Q420q material is a kind of structural steel plate for bridges, and there are three quality levels Q420qD, Q420qE and Q420qF. When the Q420q plate is required to have the performance in the thickness direction, the symbols Z15, Z25, Z35 representing the performance level in the thickness direction are added after the above-mentioned grades. Namely Q420qDZ15, Q420qDZ25, Q420qDZ35, Q420qEZ15, Q420qEZ25, Q420qEZ35, Q420qFZ15, Q420qFZ25, Q420qFZ35.

Ordinary carbon steel killed steel plate deoxidizes the liquid steel before making. When the liquid steel is poured into the ingot, its reaction is relatively calm and there is no boiling state. Advantages: this kind of steel plate S235J0W low alloy steel has no gas, less impurities, uniform stress and good welding performance. Widely used in demanding parts
S235J0W low alloy steel

The cold bending method is mainly used to produce cold-formed section steel and welded pipe. The cold bending method is to bend the steel strip or steel plate into various cross-section shapes by the cold bending machine in the cold state. If the steel pipe is bent into a circular, square or other hollow shape and welded by a proper welding method, it is a welded pipe. The advantages of cold bending: first, the cold-formed section steel is light in weight and large in bearing capacity, and it can save metal by replacing the hot-rolled section steel; second, it can produce all kinds of extremely thin, extremely wide and complex section steel which can not be produced by hot rolling.
S235J0W low alloy steel

S235J0W low alloy steel,A572 Grade 50 steel with the thickness range is 1.2-600mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the A572 Grade 50 steel coil thickness should not exceed 25 mm. For A572 Grade 50 steel, the C element content is 0.23%, the Si element content is 0.4% max, the Mn element content is 1.35% max, the P element content is 0.004% max, the S element content is 0.05% max, the V element content is 0.06%, the Ni element content is 0.015%, the Co element content is 0.05%.

S235J0W low alloy steel,Adhere to the spirit of quality first and user foremost, carry out maintenance and other work according to the requirements of the buyer's contract, and ensure that the engineering project and product after-sales play their application effectiveness. Our company guarantees to carry out self inspection and self supervision according to the quality management policy proposed by our company, and deliver a high-grade, perfect and excellent system engineering to users.
S235J0W low alloy steel