nuance 16mo3 physical properties

Whose hardness is higher between No.20 steel and No.45 steel, nuance 16mo3? Both No.20 steel and No.45 steel belong to high-quality carbon structural steel. According to the characteristics of high-quality carbon structural steel, its carbon content determines the performance of the steel. The higher the carbon content, the higher the hardness and strength of the steel, the lower the plasticity and toughness. The carbon content of No.20 steel and No.45 steel are 0.20% and 0.45% respectively, which shows that the hardness of No.45 steel is higher under the same process.

The company adheres to the customer philosophy of "customer first, pursuit of excellence". With the service tenet of "low price, excellent quality, fast transportation and constant commitment", we are committed to providing nuance 16mo3 high quality and timely steel products and services for steel users all over the world. And created a good customer reputation. The main products of the company are section steel, steel pipe, thin plate, rolling plate, medium and thick plate, etc.

Normalizing is a special case of annealing, the effect is similar to annealing, but the microstructure obtained by normalizing is finer. For low or medium carbon steel, normalizing can improve hardness and machinability. For nuance 16mo3 medium carbon steel and low alloy steel, normalizing can refine grain and uniform structure and reduce hardness. For high carbon steel and high alloy steel, normalizing can eliminate the network carbide produced by forging and improve the homogeneity of the preparation heat treatment structure.

Under the action of the roller and the plug, a cavity is formed in the blank, which is called the blank. Then send it to the automatic tube rolling machine to continue rolling. Finally, the wall thickness of the whole machine is equalized and the diameter is calibrated by the sizing machine to meet the specification requirements. It is an advanced method to produce nuance 16mo3, hot-rolled seamless steel tube by continuous rolling mill.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.