Corten strip JIS SPA-H size range and specification

The Egypt customer ordered 130 tons stainless steel plate in stock, and this batch has left port today for its destination today(October 25th, 2019) 316l stainless steel is molybdenum-bearing austenitic stainless steel This material has better corrosion resistant property than 304/314L for it's higher Ni and Mo content (it is considered to be marine grade stainless steel, not suitable for warm sea water treatment) 316L austenitic stainless steel supplied by our company has good formability and weldablity, additionally it is proved to have excellent properties of tensile, creep and stress-rupture strengths in elevated temperature environment,JIS SPA-H size.JIS SPA-H size,15Mo3 steel plate executive standard: DIN 17155
15Mo3 steel plate classification: Boiler and pressure vessel steel plate
Application of 15Mo3 steel plate: 15Mo3 steel plate is mainly used to manufacture spherical storage tanks with a capacity of more than 50m3, as well as class II and III vessels such as single-layer roll welding vessels, multi-layer heat sleeve roll welding vessels, multi-layer binding vessels and low-temperature pressure vessels.
P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. P235GH steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.Our quality and service commitment: product quality problems, life-long replacement.
In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.
JIS SPA-H sizeJIS SPA-H size,For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.
JIS SPA-H size