Flaw detection of tata steel S355J2WP

The company now has tata steel S355J2WP oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than tata steel S355J2WP 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

S235JR grade is actively used to implement civil engineering solutions. Steel structures are made from S235JR steel for the construction of industrial and residential facilities, parts of power transmission towers, elements of equipment, offshore structures, oil and gas platforms, automobile bridges and other structures. S235JR steel plate can be welded without restrictions, without subsequent heat treatment and without heating; however, note that as the product thickness increases, so does the risk of cold cracks.

Just as tata steel S355J2WP, the boiler steel plate also has strict control of chemical composition for the material, especially harmful elements such as phosphorus and sulfur, and residual elements such as chromium, nickel, and copper; during smelting, good deoxidation and removal of non-metallic inclusions should be carried out to ensure good quality, plasticity and toughness. The organizational structure requires uniformity, and the grain size is controlled within a certain range; there are also strict requirements for surface quality and internal defects. In addition, the boiler steel plate mechanical properties at room temperature and high temperature must be guaranteed.

During the construction of hot-dip tata steel S355J2WP galvanized pipe, the correct welding process shall be adopted, the inspection and acceptance shall be carried out in strict accordance with the specification, and the anti-corrosion treatment (zinc rich paint) shall be done timely after the welding is completed. It is feasible in the construction process of open and closed air conditioning system, which can improve the tata steel S355J2WP construction speed and the firmness of the pipe connection. Therefore, the hot-dip galvanized pipe can be welded and connected under the construction conditions and on the premise of relevant protection and anti-corrosion measures.

"Adopt standard specification: ASTM, JIS, EN, DINCategory: Structural Steel, carbon steel plate, tata steel S355J2WP, hot rolled plateCarbon steel plate specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mmThird Party Inspection: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department."

Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.