Flaw detection of astm a516 grade 70 low temperature

S50C steel plate is a high-quality high-quality medium carbon steel. S stands for steel, which means iron, and 50 stands for carbon content of 0.50%. C represents carbon steel, which means that S50C is a carbon steel with a carbon content of 0.50%.
Mechanical properties of S50C steel plate:
Tensile strength σb (MPa): ≥630 (64); Yield strength σs (MPa): ≥375 (38); Elongation δ5 (%): ≥14; Reduction of area ψ (%): ≥40; Impact Work Akv (J): ≥31(4); Impact toughness value αkv (J/cm2): ≥39(4)
Hardness: unheated, ≤241HB; annealed steel, ≤207HB

If a destructive accident occurs during the use of the boiler, it will cause serious losses. Therefore, other than some common strengths with astm a516 grade 70 low temperature, the boiler steel plate must have good physical properties, mechanical properties and workability, and be strictly specified in the technical terms of the material standard to meet its safety in use. High temperature (above creep temperature) boiler steel plates are generally low-alloy heat-resistant steels, such as chromium molybdenum steel, chromium molybdenum vanadium steel, chromium molybdenum tungsten steel, etc.

Semi-endless rolling technology has three advantages: the astm a516 grade 70 low temperature product's limit thickness and limit width specification range has been significantly expanded. The thinnest thickness of SPHC steel has been expanded from 1.0 mm to 0.78 mm, and the limit specification product width has been expanded from 1100 mm to 1300 mm; The thinnest thickness of Q235B steel has been expanded from 1.2 mm to 1.0 mm, and the width range of the limit specification products has also been further expanded.

We are engaged in astm a516 grade 70 low temperature corten steel, weathering steel, atmosphere corrosion resistant steel materials. After receiving your inquiry about the weathering steel, we will make quotation for you at the first time. Meanwhile, our professional team can give you valuable answers about all kinds of question about the weathering steel. For example, corten steel cost per square foot, S355J2WP equivalent, astm a516 grade 70 low temperature ASTM A242 steel properties, A588 steel yield strength, etc. If you have any demands or questions about weathering steel, please feel free to contact us.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.