Export great S235J0W steel strip to Thailand

Q345 is a grade of carbon structural steel. Q is the meaning of yield strength, which is taken from the initial of Chinese Pinyin of "Qu"; 345 is the value of yield point, in MPa. Q345 refers to carbon structural steel with yield point (σ s) of 345mpa. The following letters indicate the quality level, including A, B, C, D and E. Q345 steel has good comprehensive mechanical properties, low temperature performance, good plasticity and weldability. Q345 steel is usually in hot rolling or normalizing state.
S235J0W steel strip

S235J0W steel strip,The main characteristics of , 12Cr1MoV alloy steel plate are as follows:Compared with 12CrMoV steel, 12Cr1MoV alloy steel plate has higher oxidation resistance and thermal strength The creep limit of 12Cr1MoV steel is close to the stress rupture strength, and it has high plasticity under the condition of long-term tension The process and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress relief treatment is required after welding,S235J0W steel strip.

The correct choice of billet type, section shape, size and weight are of great significance to steel rolling production. Steel rolling production has certain technical requirements for raw materials, such as steel type, section shape, size, weight, and surface quality. The consideration of these technical requirements is necessary to ensure the quality of steel. It should also be specifically considered when determining and selecting the blank. The rolling method can be divided into cold rolling and hot rolling according to the rolling temperature.

S235J0W steel strip,We have a professional production team and high-quality production equipment, and we also have a great advantage in price, with its own factory, large-scale production to reduce the price. Strictly control each production line to ensure the production of high-quality steel plates, steel pipes and other products that meet customer requirements.

S235J0W steel strip,When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.