EN 10155 S355K2W steel sheet flat bar

EN 10155 S355K2W steel sheet,We are world class steel materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.

The main component of EN 10155 S355K2W steel sheet manganese plate is manganese, which is a relatively powerful element type, and plays a more important role in long-term development and continuous use. The main characteristics of manganese plates are high hardness and high strength. For general manganese plates, it is necessary to enhance the compressive capacity of manganese steel plates and various basic corrosion resistance capabilities. For common manganese plates, pay attention to use, choose good specifications and classifications, thus the use value of manganese plates will be better.

12Cr1MoVR steel plate is suitable for medium and high temperature pressure vessels, and implements GB713-2014 standard. 12Cr1MoVR pressure vessel plate is usually delivered in normalizing + tempering state. According to the special agreement at the time of order, 12Cr1MoVR steel plate can also be delivered in annealing or tempering state, which significantly improve the plasticity and impact toughness of steel, and improve the anisotropy of steel.

EN 10155 S355K2W steel sheet,S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.
As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.
EN 10155 S355K2W steel sheet

EN 10155 S355K2W steel sheet,As to the Chemical composition, the different content is a main on carbon content, while the carbon content of A283Gr. D is no more than 0.27% and it is higher than Grade C (≤0.24%) ; as to the mechanical property, the differences are tensile strength and yield strength, while the tensile strength of ASTM A283 Gr.D is 415-550MPa (60-80 ksi) and yield strength of ASTM A283 Grade D is 230MPa (33 ksi).
EN 10155 S355K2W steel sheet

EN 10155 S355K2W steel sheet,First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.