EN 10025-5 S355J0W steel strip thickness size range

The company adheres to the "variety, quality and efficiency" road. We have established a technology center, a brand cultivation management system and a quality control system. Now the company has formed an independent innovation system integrating production, learning, research and marketing. Our company has passed ISO9001 quality management system certification and ISO10012 measurement management system certification.

EN 10025-5 S355J0W steel strip,The strength indexes of pipeline steel mainly include tensile strength and yield strength. At the same time, the yield strength ratio (yield strength to tensile strength ratio) of pipeline steel is also required, which is generally in the range of 0.85-0.93. Pipeline steel shall have enough high impact toughness (crack initiation and crack arrest toughness). For the base metal, when the toughness of the material meets the requirements of crack arrest, its toughness generally can also meet the requirements of crack prevention.

EN 10025-5 S355J0W steel strip,Q345R material is a special steel grade for pressure vessels with a yield strength of 340MPa It has good comprehensive mechanical properties and technological performance The phosphorus and sulfur contents are slightly lower than the low-alloy high-strength steel plate Q345 (16Mn) steel In addition to the increased tensile strength and elongation requirements compared to Q345 (16Mn) steel, it also requires impact toughness Q345R steel plate is currently the most widely used and most used steel plate for pressure vessels in China,EN 10025-5 S355J0W steel strip.

Both steelmaking and ironmaking are carried out by oxidation-reduction reaction, but there are great differences between them in reaction objects: ironmaking is to reduce iron, while steelmaking is to remove excessive carbon and other impurities in pig iron, so there are relations and differences between them in actual operation. There are three main methods of steelmaking: converter, electric furnace and flat furnace. The converter steelmaking process is most widely used.

We supply 3500 tons SA387GR5CL1 steel plates to Pakistan. The main businesses of the Pakistan customer are manufacturing columns & towers, heat exchanger, waste heat recovery boiler, pressure vessel & reactors, tanks, etc. We arranged SGS test for the SA387GR5CL1 steel plates. The test contents include chemical composition analysis, tensile test, impact test, etc. The test results are satisfied. The Pakistan customer gave good feedback after receiving the SA387GR5CL1 steel plates.

40Cr grade under GB/T 3077-2015 standard is a alloy steel bar material. 40Cr alloy chemical composition (C: 0.37 ~ 0.44, Si: 0.17 ~ 0.37, Mn: 0.50 ~ 0.80, Cr: 0.80 ~ 1.10, Ni: ≤0.30, P: ≤0.030, S: ≤0.030, Cu: ≤0.30, Mo: ≤0.10). Heat treatment: First quenching heating temperature (℃): 850; coolant: oil; Temperature heating temperature (℃): 520. 40Cr steel tensile strength (σb / MPa): ≥980. Yield point (σs / MPa): ≥785EN 10025-5 S355J0W steel strip

Product concept: take the technology leading as the pillar of the enterprise, achieve the development goal of the enterprise with the reliable products, the reliable technology and the trustworthy services, and devote to the creative reform activities leading in the technical development and career of the industry to create new value through continuous change.