What is the Q355NH tower steel equivalent grades

home > News

What is the Q355NH tower steel equivalent grades

When phosphorus, copper, chromium, nickel and other trace elements are added to the weathering steel sheet, a dense and strong adhesion protective film will be formed on the steel surface, which will hinder the corrosion from spreading and developing inside, and protect the substrate under the rust layer, so as to slow down the corrosion rate. That is why the weathering steel sheet, Q355NH tower steel has good atmosphere corrosion resistance.

After extrusion, the Q355NH tower steel tube shall be removed for sizing. The sizing machine uses a cone-shaped bit to rotate into the steel embryo at high speed to drill holes to form steel pipes. The inner diameter of the steel pipe is determined by the outer diameter length of the drill bit of the sizing machine. After sizing, the steel pipe will enter the cooling tower and be cooled by water spray. After cooling, the steel pipe will be straightened. After straightening, the steel pipe is sent to the metal flaw detector (or hydraulic test) by the conveyor belt for internal flaw detection.

The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as Q355NH tower steel, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.

Ask for the instant quotation