A588 Grade A container steel strength parameters

45Mn carbon structural steel can obtain better comprehensive mechanical properties after quenching and tempering. The cutting performance is still good, but the welding performance is poor, the cold deformation plasticity is low, and there is a tendency to temper brittleness. It is generally used in the quenched and tempered state, and A588 Grade A container steel can also be used in Used in quenched and tempered or normalized state.

After a certain period of time, the steel products will reduce the toughness and increase the hardness, which is called aging effect. Generally, this effect is strongest at 200-300 ℃. The aging tendency of A588 Grade A container steel, low carbon steel (about 0.1% carbon content) is especially large, while high carbon steel and alloy steel containing molybdenum, barium or tungsten are not easy to produce aging. For boiler steel plate, it is required that the reduction rate of impact initial property is not more than 50%, or the absolute value of impact initial property is not less than 3-3.5KGM / cm2.

The blanking of the structural steel plate is first to find 90 degrees, and then use a tape measure and a powder line to draw the cutting range. According to the thickness of the carbon steel plate plus the cutting allowance, drilling is required. For the deep processing of A588 Grade A container steel structural steel sections or profiles: First use a square ruler or a curved ruler to find 90 degrees, and then use a square ruler or a ruler to cut the line and add the cutting margin to the hole.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel A588 Grade A container steel plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.