SA588 Grade A, SA588 Grade B corten steel coil prices should not have a sharp drop for a short period of time

Delivery status: Hot-rolled SA588 Grade A, SA588 Grade B corten steel coil steel In the hot-rolled state or controlled rolling state or heat treatment, the state of delivery, cold-rolled steel to the annealing state of delivery.

Mechanical properties of SA588 Grade A, SA588 Grade B corten steel coil, Q420qENH steel plate:
The thickness of Q420qENH is not more than 50mm, the yield strength is not less than 420MPa, the tensile strength is not less than 540, and the elongation is not less than 19%.
The thickness of Q420qENH is 50mm-100mm, the yield strength is not less than 410MPa, the tensile strength is not less than 410, and the elongation is not less than 19%.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

Ordinary medium and thick steel plate SA588 Grade A, SA588 Grade B corten steel coil is a kind of deoxidized steel. The oxygen content of the steel liquid is relatively high, and a lot of gas will be produced during the production process to make the steel liquid boil, so it is also called boiling steel. Advantages: this kind of steel plate has smooth surface, good quality and easy processing. Because this kind of steel plate has no concentrated shrinkage cavity, the amount of deoxidizer is very small and the price is lower than other steel plates.