Welding Q295GNH, Q310GNH, Q355NH corten steel steel number

The yield rate is a comprehensive technical and economic index in the production of medium and heavy plates such as Q295GNH, Q310GNH, Q355NH corten steel. Increasing the yield rate can not only reduce the loss of metal, but it is also vital to the economic benefits of the steel enterprise. The influencing factors of the yield of medium and heavy plates are various, for example, the variety structure, negative deviation rolling level, plate shape control level, cutting loss, rolling waste and burning loss, etc.

The qualified flat steel has sufficiently high high temperature strength and high temperature plasticity. Therefore, Q295GNH, Q310GNH, Q355NH corten steel flat steel is not only required to have high enough normal temperature and instantaneous high temperature tensile strength and plasticity, but also long-term strength and long-term plasticity to ensure long-term safe work at high temperatures, especially under creep leakage conditions. The product thickness is 8-50mm, width 150-625mm, length 5-15m。

2000 tons hot rolled sheet Q295GNH, Q310GNH, Q355NH corten steel inventory list
7*2920*8780, 6*1650*10570, 5.5*3000*5000, 6*2310*8500, 6*2750*9600, 7*2000*8950, 5*2570*8000, 6*1850*7510, 7*2560*8600, 8*2100*8000, 6*1750*8500, 7*2920*13000, 7*2920*8780, 8*2920*6300, 6*2960*10700, 6.5*2200*10000, 8*1800*6850, 8*3040*4000, 8*1500*4850, 8*1700*6300, 10*2000*7700, 10*2030*8200, 10*1750*6000.

After adding phosphorus, copper, chromium, nickel and other trace elements to the steel, a dense and highly adherent protective film is formed on the surface of the steel, which hinders the spread and development of rust and protects the substrate under the rust layer to slow down its corrosion rate. The amorphous spinel-type oxide layer with a thickness of about 50μm-100μm formed between the rust layer and the substrate is dense and has good adhesion to the substrate metal.