1/4 inch S355J0W to EN 10155 steel plate weight

S355J0W to EN 10155 steel plate,The company adheres to the "variety, quality and efficiency" road We have established a technology center, a brand cultivation management system and a quality control system Now the company has formed an independent innovation system integrating production, learning, research and marketing Our company has passed ISO9001 quality management system certification and ISO10012 measurement management system certification,S355J0W to EN 10155 steel plate.

SM490A steel plate is a low-alloy high-strength steel. It is a structural steel produced in accordance with Japanese standard JIS G3106. Its strength σb is 490MPa. It is mainly used for buildings, bridges, ships, rail vehicles, petroleum storage tanks, containers and other buildings that require advanced weldability. JIS SM490A steel sheet delivery status: steel plates with a thickness of <80mm, the delivery state is hot-rolled; steel plates with a thickness of ≥80mm, the delivery state is normalized condition.

For Q345B steel plate, Q stands for the yield of Q345B material. The 345 at the back refers to the yield value of Q345B material, which is about 345MPa. The yield value will decrease with the increase of Q345B steel plate thickness. Q345B steel plate has good comprehensive performance, low temperature performance, cold stamping performance, welding performance and machinability. It is widely used in bridges, vehicles, ships, buildings, pressure vessels, etc.S355J0W to EN 10155 steel plate

Plasma cutting has a wide range of applications. With different working gas, it can cut various kinds of metals that are difficulty to handle by oxygen cutting. Plasma cutting is fast and efficient when cutting metal with small thickness. The cutting speed can reach more than 10m/min. Plasma cutting can get a clean, neat, non stick slag cutting surface, while the deformation and thermal effect of the incision are small, its hardness change is little, and the cutting quality is good.

Square hollow section S355J2H to Turkey. In January of 2015, our customer from Turkey chose us as their supplier of seamless RHS EN10219 S355J2H with a trail order of 120 tons. They required DNV test for the MTC and each tube. DNV inspector tested all the tubes and MTC. When our customer received the reports, they gave us a second order of 852.5 tons. Since then we maintain a long time cooperation relationship.

40Cr grade under GB/T 3077-2015 standard is a alloy steel bar material. 40Cr alloy chemical composition (C: 0.37 ~ 0.44, Si: 0.17 ~ 0.37, Mn: 0.50 ~ 0.80, Cr: 0.80 ~ 1.10, Ni: ≤0.30, P: ≤0.030, S: ≤0.030, Cu: ≤0.30, Mo: ≤0.10). Heat treatment: First quenching heating temperature (℃): 850; coolant: oil; Temperature heating temperature (℃): 520. 40Cr steel tensile strength (σb / MPa): ≥980. Yield point (σs / MPa): ≥785

S355J0W to EN 10155 steel plate,The company revolves around the long-term strategy of "building a quality base and building a century-long BEBON", adheres to the development ideas of innovation, transformation, and improvement, vigorously promotes transformation and upgrading, structural adjustment, energy conservation and emission reduction, and strives to create high-quality steel with strong core competitiveness and distinctive features The production base has become a green steel city with intensive land use, clean production, efficient use of resources, harmonious and friendly production and environment, business and society, and BEBON characteristics.