Do you want any logistics service, then call us: +86-371-86151827
Smelting process of JIS G3114 atmospheric corrosion resisting steels, container plate SPA-H weather-resistant steel: The molten iron for smelting SPA-H steel must be pretreated by molten iron desulfurization. Before entering the converter, the sulfur content of the molten iron is ≤0.010%, and the slag on the surface of the molten iron is cleaned. Nickel plates, copper particles or nickel-copper alloys are added to the converter with scrap steel. The carbon content of the converter smelting end is required to be less than 0.06% to prevent the molten steel from being oxidized.
Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This JIS G3114 atmospheric corrosion resisting steels rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.
Oxygen (O) is a harmful element in steel such as JIS G3114 atmospheric corrosion resisting steels. Although manganese, silicon, iron and aluminum are added to deoxidize the steel at the end of steelmaking, they can not be removed completely. During the solidification of molten steel, the reaction of oxygen and carbon in the solution will produce carbon monoxide, which can cause bubbles. Oxygen mainly exists in the form of FeO, MnO, SiO2, Al2O3 and other inclusions in the steel, which reduces the strength and plasticity of the steel. Especially, it has serious influence on fatigue strength and impact toughness.
According to the data released by the Japan iron and Steel Union (JISF), the export volume of Japanese steel in the second quarter of 2020 JIS G3114 atmospheric corrosion resisting steels is about 4.959 million tons, a year-on-year decrease of 14.2%; the export volume in the first half of 2020 is about 11.07 million tons, with a year-on-year growth of 1.8%. It has been revealed that the year-on-year increase in export volume does not mean that Japan's export JIS G3114 atmospheric corrosion resisting steels situation of Pugang is better in the first half of the year, but only because the base number of the same period last year is too low.