09CuPCrNi-B dealer is required to have high toughness

For the 09CuPCrNi-B dealer construction industry, the largest consumer sector of the steel industry and the least affected industry in the EU this year, it is estimated that 09CuPCrNi-B dealer steel consumption will account for 35% of the EU steel consumption market this year. Uestf forecasts that the output of the construction industry will decline by 5.3% in 2020 and rise by 4% in 2021.

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

09CuPCrNi-B dealer, Q460 material is a low-alloy high-strength steel. Q stands for the strength of steel. 460 means that plastic deformation occurs only when the strength of the steel reaches 460MPa. That is, when the external force is released, the steel can only maintain the shape of the force and cannot return to its original shape. This strength is greater than that of ordinary steel. Tensile strength is 550-720MPa, elongation: 17%, Q460 material is made by adding Cr, N, V, Ti and other alloying elements on the basis of 16Mn steel.

35SiMn steel chemical elements: C: 0.32-0.40, Si: 1.10-1.40, Mn: 1.10-1.40. The mechanical properties of 35SiMn steel: tensile strength 885 MPa; yield strength 735 MPa; elongation after fracture: 15; reduction of area: 45; impact energy: 47J. 35SiMn steel belongs to alloy quenched and tempered steel with good properties and can be used instead of 40Cr steel. After quenching and tempering, 09CuPCrNi-B dealer, 35SiMn steel has high static strength, fatigue strength, wear resistance, good toughness, good hardenability and medium plasticity during cold deformation.

Our client purchase more than 900 tons pipe 09CuPCrNi-B dealer from India. And we do the inspection for each one pipe before shipment.During the inspection, the inspector saw that the surface of the square pipe kept the original color of the stainless steel, no fracture, no depression and other quality defects was found.

The strip steel thickness is generally below 6mm, which is convenient for crimping and processing. You should choose the 09CuPCrNi-B dealer, strip steel specifications according to your own purposes. The specifications and materials used for different purposes are different, so you must confirm it before buying. It is best to ask professionals to give advice before purchasing strip steel, and purchase the specifications and types you need according to the corresponding requirements.