What should be paid attention to when using astm a242 type 1

Since its establishment, the company has always adhered to the enterprise spirit of "solid feet and lofty ideals, dare to create and take responsibility, and dedicate to work". After years of careful management, the company has achieved the double improvement of astm a242 type 1 capital strength and scale expansion, gained wide recognition and general praise from all walks of life, further realized specialized and large-scale operation and optimized allocation of resources, and effectively improved the astm a242 type 1 overall strength, competitiveness and anti risk ability of the company.

Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of astm a242 type 1, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.

Wear resistant steel is very wear-resistant: for example, excavator bucket, long-term excavation requires good wear resistance. Wear resistant steel has a very high hardness: for example, scraper conveyor, if the hardness is not up to standard, it is extremely easy to fracture, resulting in very serious consequences. Wear resistant steel has good corrosion resistance: many equipment need to transport chemical corrosion products, so corrosion-resistant mechanical equipment is needed. astm a242 type 1, Wear resistant steel has good fatigue resistance: such as bearing steel ball, which can do fast and repeated movement, and need to guarantee performance.

The characteristic of niobium in astm a242 type 1 etc. steel material is to increase the recrystallization temperature of austenite, so as to achieve the purpose of refining austenite grains. In general, the amount of niobium added in steel material is less than 0.05%, and the contribution of niobium above 0.05% to strengthening and toughening will no longer be obvious.

20Mn2 steel has medium strength, and the properties of 20Mn2 steel and 20Cr steel are similar. The impact toughness and weldability of 20Mn2 steel at low temperature are better than those of 20Cr steel. The plasticity and machinability of 20Mn2 steel are high during cold deformation. The hardenability of 20Mn2 steel is higher than that of corresponding carbon steel, astm a242 type 1. Chemical composition of 20Mn2 steel: C: 0.17-0.24, Si: 0.17-0.37, Mn: 1.40-1.80. Mechanical properties of 20Mn2 steel: tensile strength ≥ 785 MPa, yield strength ≥ 590 MPa, elongation after fracture ≥ 10%, section expansion rate ≥ 40%, impact absorbed energy ≥ 47J.

For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate astm a242 type 1 EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.