What is the forecast trend of EN 10155 S355J0W steel strip in the coming week

The company covers an area of 15,000 square meters and the plant construction area is 10,000 square meters We have introduced more than 50 sets of advanced production equipment, auxiliary equipment and testing equipment at home and abroad, more than 260 employees, more than 20 middle and senior management staff, more than 10 professional and technical personnel, annual production capacity of 100,000 tons Main products: flat steel, steel pipe, steel plate, section steel, steel structure processing parts, etc We also accept incoming materials and annealing processing,EN 10155 S355J0W steel strip.

ASTM A633 material is particularly suited for service at low ambient temperatures and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired. A633 Grade E high-strength low-alloy structural steel provides a minimum yield point of 60 ksi [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. to 6 in. [100 to 150 mm], inclusive.

We have 4 typical production lines, which can produce hot rolled Seamless, LSAW, ERW and SSAW pipes. The Seamless pipe production line range is OD 10.3mm-965.2mm, wall thickness 1.0mm-60mm, Annual capacity is 500 thousand tons. LSAW pipe production line range is OD 406mm-1524mm, wall thickness 6mm-50mm, Annual capacity is 150 thousand tons.

The amount of Vanadium in steel material is generally between 0.04% and 0.12%. The role of Vanadium is to affect the microstructure and properties of steel material. It mainly precipitates in the ferrite at the austenite grain boundary, and can inhibit the recrystallization of austenite and prevent the crystal during rolling. The grains grow, which refines the ferrite grains and improves the strength and toughness of the steel material.EN 10155 S355J0W steel strip

Difference between Q235A steel and Q235B steel plates: in the national standard GB700, the difference between Q235A steel and Q235B steel plates is mainly in the carbon content. In addition, Q235A steel plate does not do impact test, while Q235B Q235B steel plates need normal temperature impact test, V-notch. Relatively speaking, the mechanical properties of Q235B steel plates are better than that of Q235A steel plate.

Hot rolled plates are known for their superior mechanical properties over commodity grades of merchant bar The hot rolled plates products are made to specific chemistry and mechanical properties ranges, allowing them to be used in engineered applications Resulting shafts, axles, and gears can be used in the automotive industry and agriculture equipment A36 mild steel has good strength, formability, and excellent welding properties We also can supply welding, fabricating, and bending service,EN 10155 S355J0W steel strip.

EN 10155 S355J0W steel strip,The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.