What is the A588 Grade K construction steel BBN Steel advantages

The company adopts modern management concept, adheres to “quality for survival, integrity for development”, and provides customers with high-quality and reliable steel A588 Grade K construction steel products and wholehearted service. The company continuously deepens the internal reform of the enterprise, innovates in the reform, develops in the innovation, and gradually forms a set of management and operation mechanism which adapts to the A588 Grade K construction steel market and has strong competitiveness.

Our steel pipes include four major types which are seamless pipe, ERW pipe, LSAW pipe, SSAW pipe, A588 Grade K construction steel. Seamless pipe supply scope is OD 10.3mm--965.2mm, wall thickness 1.0mm--60mm. The ERW pipes production range from OD 21.3mm--660mm, wall thickness 1.0mm--16mm. LSAW pipes can supply with OD 406mm--1524mm, wall thickness 6mm--50mm. SSAW pipes can produce maximum OD 3500mm, minimum OD 219.1mm, wall thickness 3.2--25.4mm.

The most remarkable characteristic of low alloy high strength steel is high strength. In hot rolling or normalizing state, the strength of low alloy high strength steel is generally 30% - 50% higher than that of corresponding carbon engineering structural steel, A588 Grade K construction steel. Therefore, it can bear large load. Engineering structures are usually large or huge, and the weight of the component itself often becomes an important part of the load. When the strength of the structural material is improved, the self weight of the component can be significantly reduced, and its ability to bear other loads can be further improved.

The microstructure of the quenched and tempered alloy steel, A588 Grade K construction steel after conventional heat treatment is tempered sorbite. For parts with wear-resistant surface (such as gears and spindles), induction heating surface quenching and low-temperature tempering are carried out, and the surface structure is tempered martensite. The surface hardness can reach 55HRC-58HRC. After quenching and tempering, the yield strength of quenched and tempered alloy steel is about 800MPa, the impact toughness is 800kJ / m2, and the core hardness is 22HRC - 25HRC. If the cross-section size is large but not quenched, the properties will be significantly reduced.

The chemical composition difference between A588 Grade K construction steel, Q235B and 20# steel is as follows:
The chemical composition of 20# steel: C: 0.17-0.23%, Si: 0.17-0.37%, Mn: 0.35-0.65%, Cr: ≤ 0.25%, Ni: ≤ 0.30%, Cu: ≤ 0.25%. Chemical composition of Q235B steel: C: ≤ 0.20%, Si: ≤ 0.35%, Mn: ≤ 1.40%, P: ≤ 0.045%, S: ≤ 0.045%.
The difference of mechanical properties between A588 Grade K construction steel, Q235B and 20# steel is as follows:
The mechanical properties of 20# steel: tensile strength 410 MPa; yield strength 245 MPa; elongation after fracture: 25; reduction of area: 55; no impact. Q235B steel mechanical properties: tensile strength 370-500 Mpa; yield strength: ≥ 235 Mpa; elongation after fracture: 25; impact absorption energy: 27J.

Keep close relationship with all manufacturers and users, cooperate sincerely, share weal and woe together. We are deeply tolerant of travelling with you! We value and value each other's career and friendship. No matter when and where, all our staff will spare no effort to put into the work, and do their best to provide A588 Grade K construction steel satisfactory services for all friends, so as to achieve win-win and multi win for each other.

We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide A588 Grade K construction steel reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.