welding of 16mo3 VS A36 material

The company has superior geographical location and convenient transportation. After more than 20 years of market trials and tribulations, from small to large, from weak to strong, in order to meet the needs of customer extension development, the company expanded the deep welding of 16mo3 processing services of cutting steel pieces. Now we have built a business system integrating steel plate, steel plate cutting and welding of 16mo3 steel deep processing. The company provides one-stop solution for customers with lower price, higher quality and faster response speed.

welding of 16mo3, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of welding of 16mo3, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.

The mechanical properties of 20MnV steel are as follows: tensile strength 785 MPa, yield strength 590 MPa, elongation after fracture 10%, reduction of area 40%, impact absorption energy 55 J. welding of 16mo3, 20MnV steel has good properties, good strength, toughness and plasticity, good hardenability and machinability. After carburizing, 20MnV steel can be directly quenched without secondary quenching to improve the core structure. The weldability of 20MnV steel is good, but there is temper brittleness at 300-360 ℃ during heat treatment.

Manganese steel plate is a kind of common steel, which is a kind of high-strength anti manganese steel. welding of 16mo3, Manganese steel plate is mainly used to bear the impact, extrusion, material wear and other severe working conditions. It is a typical anti-wear steel, with austenite and carbide as cast structure. After water quenching at about 1000 ° C, the structure changes into single austenite or austenite with a small amount of carbide.

Pressure vessel steel plates are mainly used for manufacturing pressure vessels and other similar equipment for gas separation and gas storage and transportation in petroleum and chemical industry. Generally, the working pressure of pressure vessel steel plates ranges from normal pressure to 320kg / cm2 or even 630kg / cm2, and the temperature ranges from - 20 °C to 450 °C. In addition to certain strength, good plasticity and toughness, pressure vessel steel plates must also have good cold bending and welding properties. Q245R, Q345R, 14Cr1MoR, 15CrMoR, welding of 16mo3 etc. are common pressure vessel steel grades.

If you have steel demands in the near future, please send us inquiry in advance, as we have regular steel production plan and can arrange you a reasonable prodction time. Other than fresh production, we also have huge welding of 16mo3 stocks for the most widely used steel materials. So that the customers need not wait too long to get their required steel. Welcome to contact us and consult steel price, our sales person will give you professional answers and suggestions.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.