Effect of alloy elements on mechanical properties of welding of 16mo3

The cold rolling precision bright pipe system produced by our factory has smooth appearance, uniform wall thickness, no oxide layer and high precision. The inner hole of welding of 16mo3 steel pipe can be divided into round, spline and plum blossom, which is widely used in automobile, motorcycle, electric power, petrochemical, ship, aerospace, bearing, pneumatic components, oil cylinder, boiler equipment, medical equipment, fitness equipment and other industries. Materials can be divided into: 10#, 20#, 35#, 45#, 40Cr, 16Mn, etc. According to the needs of users, we can make all kinds of national standard non-standard precision pipes. Special welding of 16mo3 materials and specifications can be ordered in advance.

Normalizing process of S355J2 steel plate: normalize the S355J2 steel plate in the bottom furnace, normalizing temperature is 880-910℃, holding time is 1.8-2.2min/mm, that is to get the required S355J2 + N steel plate. 355j2 + N steel plate is mainly used in large machinery manufacturing, equipment base, large welded steel structure, construction, bridge and other fields. With the continuous development of economy and the large-scale demand of equipment, the demand of ultra thick welding of 16mo3, S355J2 + N steel plate is increasing gradually.

Weathering steel has good resistance to atmospheric corrosion. Although the initial investment cost of weathering steel is slightly higher than that of ordinary carbon steel. Compared with methods such as spraying anticorrosive coating on the surface of ordinary carbon steel, the later maintenance costs of ordinary carbon steel are weathering steel. 1.5-2 times. Therefore, welding of 16mo3 weathering steel can reduce environmental pollution and is a key promotion technology for energy saving and emission reduction. Most domestic weathering steels are painted and used, and their original intentions of no-painting and "rust prevention" have not been exerted to a greater extent.

Oxygen (O) is a harmful element in steel such as welding of 16mo3. Although manganese, silicon, iron and aluminum are added to deoxidize the steel at the end of steelmaking, they can not be removed completely. During the solidification of molten steel, the reaction of oxygen and carbon in the solution will produce carbon monoxide, which can cause bubbles. Oxygen mainly exists in the form of FeO, MnO, SiO2, Al2O3 and other inclusions in the steel, which reduces the strength and plasticity of the steel. Especially, it has serious influence on fatigue strength and impact toughness.

13CrMo4-5 seamless pipe is a kind of pressure resistant seamless pipe in accordance with the European standard EN 10216-2. The chemical composition of 13CrMo4-5 seamless pipe is C 0.10-0.17, Si ≤ 0.35, Mn 0.40-0.70, P ≤ 0.025, S ≤ 0.020, Cr 0.70-1.15, Ni ≤ 0.30, Mo 0.40-0.60, Al ≤ 0.04, Cu ≤ 0.03. Mechanical properties of 13CrMo4-5 seamless pipe: tensile strength: 440-590 MPa, yield strength: ≥ 290 MPa, elongation: ≥ 22%, impact energy: ≥ 40J. welding of 16mo3, 13CrMo4-5 seamless pipe is used in petroleum, chemical industry, power station, boiler and so on industries.

The steel plate, steel pipe and other steel materials are the important material in the material engineers. Our company will provide the high quality the steel plate, steel pipe and other steel materials for you. We are exported the steel plate, steel pipe and other welding of 16mo3 steel materials to the customers from USA, South America, Europe, Africa etc. If we can have the good cooperation together, you will be very welcome to be our agent in your local market. Let’s work together!

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.