A242 type 1 tensile requirements with low and intermediate tensile strength

The company's operation is based on the principle of "quality for survival, reputation for development". In terms of management, we adhere to the principle of people-oriented, service-oriented and customer-oriented. All staff of the company have the courage to open up, unite and forge ahead, and work hard to grasp the good situation of global economic development, actively strengthen communication with outstanding enterprises in the A242 type 1 tensile requirements industry, keep pace with the times, and move towards a new course!

Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of A242 type 1 tensile requirements, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.

NM400 alloy steel plate is a kind of wear-resistant steel plate. NM—The first letter of the Chinese pinyin 400 of the characters “resistant” and “grind” for wear resistance is the HB value of the Brinell hardness value. NM400 alloy plate is widely used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery and other product parts. Excavator, loader, bulldozer bucket plate, blade, side blade, blade.

A242 type 1 tensile requirements, Q345B low alloy steel plate composition:
1) Low carbon: Due to the high requirements for toughness, weldability and cold forming properties, its carbon content does not exceed 0.20%;
2) Add manganese-based alloying elements;
3) Adding auxiliary elements such as niobium, titanium or vanadium: a small amount of niobium, titanium or vanadium forms fine carbides or carbonitrides in the Q345B steel, which is conducive to obtaining fine ferrite grains and improving the strength and toughness of the steel;
In addition, adding a small amount of copper (≤0.4%) and phosphorus (about 0.1%) can improve the corrosion resistance. Adding a small amount of rare earth elements can desulfurize and degas, purify steel, improve toughness and process performance.

Medium plate A242 type 1 tensile requirements products size: 5.5*2250*11550, 5*2200*10100, 5*1500*4500, 6*1750*13000, 5*2700*12050, 5*2700*12050, 6*1800*5500, 6*1550*6000, 9*2000*6000, 5.5*2600*10100, 5*2500*11000, 7*1800*10450, 6*3080*6000, 9*2000*9000, 5.5*2600*11850, 6*3320*5000, 9*1760*7800, 6*3370*4100, 9*2400*9800, 7*1970*7050, 6*3240*5400, 9*1800*10000, 6*3380*4800, 7*2120*6400 and 9*2400*8500.

It is a modern high-tech professional enterprise integrating scientific research, A242 type 1 tensile requirements production and sales. The company is mainly engaged in the manufacture, installation and commissioning of boiler and pressure vessel, chemical, metallurgical, petroleum and other equipment, as well as A242 type 1 tensile requirements process technology development, technology transfer and related technical consulting and technical services.

Respect customers and treat each other sincerely. Customers are always right. Always remember that the user is the God of the enterprise, respect the customer, and accept the customer's opinion modestly is the guarantee of the long-term development of the enterprise. Adhere to this concept, so that the service and the product are the same, long-term.