SMA490AW steel flat bar welding performance

home > FAQ

SMA490AW steel flat bar welding performance

In recent years, in line with the development trend of iron and SMA490AW steel flat bar steel industry at home and abroad, we have accelerated the transformation of development mode, promoted structural adjustment, and formed a rich product series of medium and thick plates, hot rolled steel coils, profiles, steel pipes, etc., which SMA490AW steel flat bar are widely used in automobiles, long-span bridges, railways, machinery, ocean and so on fields. Meanwhile, we also provide deep processing for the steel materials.

The smelting of SMA490AW steel flat bar, spring steel is very important. It is necessary to ensure excellent metallurgical quality, not only to ensure accurate chemical composition, but also to have high purity. The content of sulfur, phosphorus, oxygen and nitrogen should be low, and the uniformity and stability of steel should be good. The metallurgical quality of spring steel should reach the level of high quality steel. Due to the special requirements of production parts, spring steel must also have some characteristics.

SMA490AW steel flat bar, 09CuPCrNi-A corrosion-resistant steel plate belongs to ordinary low-alloy steel and steel for engineering structures; it is a high-strength corrosion-resistant steel plate. The combination of Cu and P can resist atmospheric corrosion. In addition, there are Cr and Ni, both of which are used in stainless steel. 09CuPCrNi-A corrosion-resistant steel plate is used to manufacture structural parts such as containers, railway vehicles, oil derricks, seaport buildings, oil production platforms, and containers containing hydrogen sulfide corrosive medium in chemical petroleum equipment.

In order to prevent the deformation of SMA490AW steel flat bar, wear-resistant composite plate during preheating, the steel plate with good quality should be selected first. The steel plate with serious carbide segregation should be reasonably cast and heat treated by quenching and tempering. For the large and non cast wear-resistant composite plate, the solution double refining heat treatment can be carried out. At the same time, the heating temperature should be reasonably selected and the heating speed should be controlled.

Chemical elements of 35CrMnSi steel: C: 0.32-0.39, Si: 1.10-1.40, Mn: 0.80-1.10, Cr: 1.10-1.40. The mechanical properties of 35CrMnSi steel: tensile strength 1620 MPa; yield strength 1280 MPa; elongation after fracture: 9%; reduction of area: 40; impact energy: 31J. SMA490AW steel flat bar, 35CrMnSi steel is used to manufacture medium speed, heavy load, high strength parts and high strength components, such as aircraft landing gear and high pressure blower blades. 35CrMnSi can partly replace the corresponding CrNi alloy steel in manufacturing small and medium section parts.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our SMA490AW steel flat bar products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.

After sales service support personnel pay attention to commitment in their work. In the process of people to people communication, mutual trust is an important factor for the long-term and stable communication. After sales service personnel must do what they say in the process of communication with customers.

Ask for the instant quotation