How to improve the quality of TB/T 1979 09CuPCrNi-A rusty steel

Our company has sales department, technology department, quality inspection department, after-sales department, logistics department. Each department has professional knowledge and high professional quality, put customers first, think about the interests of customers, actively communicate with customers and solve problems smoothly.

For Q345B steel plate, Q stands for the yield of Q345B material. The 345 at the back refers to the yield value of Q345B material, which is about 345MPa. The yield value will decrease with the increase of Q345B steel plate thickness. Q345B steel plate has good comprehensive performance, low temperature performance, cold stamping performance, welding performance and machinability. It TB/T 1979 09CuPCrNi-A rusty steel is widely used in bridges, vehicles, ships, buildings, pressure vessels, etc.

10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. TB/T 1979 09CuPCrNi-A rusty steel, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.